Surfer Search
Search the Internet
Surfer Members
SurfersNet.Com
Surfer Support
Main Support Page
Support Support

WINDOWS 95/98 DIAL-UP NETWORKING


To configure Dial-Up Networking for Windows 95 or 98, follow
this procedure:


1. Open your
Dial-UpNetworking directory. Dial-Up Networking is accessible either by double-clicking the My Computer icon on your desktop or by choosing Programs from the Start menu, then Accessories.

95-1.gif (3570 bytes)

2. Double-click on Make New Connection icon, enter SurfersNet.Com in the name field and click Next. 

95-22.gif (8358 bytes)

3. Enter your SurfersNet.Com dial-up access phone number, select Next, then click Finish.

95-33.gif (8375 bytes)

4. Next, Right-click on the newly created SurfersNet.Com icon and select the Properties menu. Enter your dial-up information as shown in the graphic below, then select ServerType.

95-4.gif (7660 bytes)

5. Enter information as shown in the graphic below, then select TCP/IP Settings

95-5.gif (5751 bytes)

6. Enter information as shown in the following graphic. SurfersNet.Com customers have dynamically assigned IP addresses, so select the Server assigned IP address radio button. Then select Server assigned name server adresses radio button.
Check IP header compression and default gateway, then click
OK.

ntdial3.gif (5440 bytes)

You should now be ready to dial in to our server.